User's Manual

Advanced Settings

N300 Wireless ADSL2+ Modem Router DGN2200v3

• Download only. The restriction is applied to incoming traffic only.

• Both directions. The restriction is applied to both incoming and outgoing traffic.

4. You can limit the amount of data traffic allowed per month:

• By specifying how many Mbytes per month are allowed.

• By specifying how many hours of traffic are allowed.

5. Set the Traffic Counter to begin at a specific time and date.

6. Set up Traffic Control to issue a warning message before the monthly limit of Mbytes or

hours is reached. You can select one of the following to occur when the limit is attained:

• The Internet LED flashes green or amber.

• The Internet connection is disconnected and disabled.

7. Set up Internet Traffic Statistics to monitor the data traffic.

8. Click the Traffic Status button if you want a live update on Internet traffic status on your

modem router.

9. Click Apply to save your settings.

Wireless Bridging and Repeating Networks

Note: If you want to use the Wireless Repeating feature, you have to go to

the Wireless Settings screen and change the wireless security

setting of the router to WEP or None, and you have to change the

Channel field to a different setting than Auto, which is the default.

For more information, see Wireless Settings Screen on page 33.

With the modem router, you can build large bridged wireless networks that form an

IEEE

802.11n Wireless Distribution System (WDS). Using the modem router with other

access points (APs) and wireless devices, you can connect clients using their MAC

addresses rather than IP addresses. Here are some examples of wireless bridged

configurations:

• Point-to-point bridge. The modem router communicates with another bridge-mode

wireless station. See

Set Up a Point-to-Point Bridge on page 94.

• Multi-point bridge. The modem router is the “master” for a group of bridge-mode wireless

stations. Then all traffic is sent to this master, rather than to other access points. See

Set

Up a Multi-Point Bridge on page 95.

• Repeater with wireless client association. Sends all traffic to the remote access point.

See

Repeater with Wireless Client Association on page 96.

The wireless bridging and repeating feature uses the default security profile to send and

receive traffic.