User's Manual

USB Storage

N300 Wireless ADSL2+ Modem Router DGN2200v3

3. Click Apply for your changes to take effect.

USB Storage Advanced Settings

To view or change advanced USB settings, select USB > Advanced Settings. The USB

Storage (Advanced Settings) screen displays:

You can use this screen to specify access to the USB storage device. The settings are as

follows:

• Network Device Name. The default is readyshare. This is the name used to access the

USB device connected to the modem router from your computer.

• Workgroup. If you are using a Windows Workgroup rather than a domain, the workgroup

name is displayed here.

Access Method

• Network Connection. Enabled by default, this allows all users on the LAN to have

access to the USB drive.

• HTTP. Disabled by default. If you enable this setting, you can type http://readyshare to

access the USB drive.

• HTTP (via Internet). Disabled by default. If you enable this settings, remote users can

type http://readyshare to access the USB drive over the Internet.

• FTP. Disabled by default.