User's Manual
Table Of Contents
- Mobile Broadband 11n Wireless Router MBR1000
- Table of Contents
- 1. Connecting to the Internet
- 2. Wireless Network Configuration
- 3. Protecting Your Network
- 4. Managing Your Network
- 5. Advanced
- 6. Troubleshooting
- A. Factory Default Settings and Technical Specifications
- B. Related Documents
- C. Notification of Compliance
- Index
46 | Chapter 4: Managing Your Network
Mobile Broadband 11n Wireless Router MBR1000
From the main menu, under the Maintenance heading, select Diagnostics:
• Ping: Ping an IP address.
• Lookup: A DNS (Domain Name Server) converts the Internet name such as
www.netgear.com to an IP address. If you need the IP address of a server on the Internet,
you can do a DNS lookup to find the IP address.
• Display: View the internal routing table. Typically, this information is used only by
Technical Support.
• Reboot: Shut down and restart the router.
Note: If you reboot the router you will lose your connection. To access the
router you will need to log in again after it has finished rebooting.
• Save: Save diagnostic information.
• Scan:
Enabling Remote Management
Using the Remote Management screen, you can allow a user or users on the Internet to
configure, upgrade, and check the status of your router.