User's Manual

Chapter 4: Managing Your Network | 41
Mobile Broadband 11n Wireless Router MBR1000
This screen shows the following statistics:
Viewing Attached Devices
The Attached Devices screen shows all IP devices that the router discovered on the local
network. From the main menu, under the Maintenance heading, select Attached Devices:
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. If the router is rebooted, this data is lost until the router rediscovers the
devices. To force the router to look for attached devices, click the Refresh button.
Viewing, Selecting, and Saving Logged Information
The router logs security-related events such as denied incoming service requests, hacker
probes, and administrator logins. If you enabled content filtering in the Block Sites screen,
the Logs screen can show you when someone on your network tries to access a blocked site.
Table 6. Connection Status Fields for HSDPA Status
Field Description
Connection Status The status of the Internet connection.
• Scanning. The modem is scanning for broadband wireless
networks in your area.
• Connected. The router is connected to the Internet.
• No USB Device Attached. The router does not detect a USB
modem connected to its USB port. Either the modem is
disconnected, or it is not correctly seated. To correct the problem
remove the modem and reinsert it into the port.
Received Signal Quality (in dbm) Modem radio reception. A small, negative number indicates good
signal quality.
Bytes Transmitted The number of bytes transmitted in the most recent connection
session.
Bytes Received The number of bytes received in the most recent connection session.
Tx B/s The transmission rate.
Rx B/s The receiving rate.
System Uptime Time elapsed since the last reboot.
Connection Duration The time elapsed since the most recent connection to the Internet.
Available Networks The broadband wireless networks available in your area.