User's Manual

14 | Chapter 1: Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1000
Table 2. Broadband Settings fields
Fields and Checkboxes Description
Username Internet account login username.
Password Internet account password for authentication.
Country Select your country from the pulldown list.
Internet Service Provider Select your Internet Service Provider from the pulldown list.
Access Number The remote site's phone number.
PIN code Pin code of the SIM card, where applicable.
APN Access Point Name.
PDP type Select the type of packet data protocol:
• IP:
• PDP-IP:
• PPP:
• PPP-IP:
Initialize Script Select the initialization script from the pulldown list.
• AT:
• ATV1:
• ATE0:
• ATZ:
• AT&F&D2&C1S0=0:
• ATQ0V1E0S0=0&C1&D2+FCLASS=0:
• Other:
Connect automatically at startup If this checkbox is selected, the modem automatically connects to the
network when powered up. This should be selected after login
information is provided.
Reconnect automatically when
connection is lost
If this check box is selected, the modem will attempt to reconnect to
the network when the connection is lost. Under normal situation, this
setting should be selected.
Connect only to preferred operators If this checkbox is cleared (not selected) the unit may roam to any
available operator in range and may incur roaming charges.
Roaming automatically If this checkbox is cleared (not selected), the unit will not roam.
Use internal antenna If this checkbox is selected, the router will use the internal antenna
rather than the external antenna.