User's Manual

Introduction
11
ProSafe Wireless - 802.11 b/g/n VPN Firewall FVS318N
Table 1-1 describes each item on the front panel and its operation.
The rear panel of the FVS318N includes a cable lock receptacle, a Factory Defaults button,
and a DC power connection.
Viewed from left to right, the rear panel contains the following elements:
Table 1-1. LED Descriptions
Object Activity Description
1. Power On (Green)
Off
Power is supplied to the VPN firewall.
Power is not supplied to the VPN firewall.
2. Test On (Amber)
Off
Test mode: The system is initializing or the initialization has failed.
The system has booted successfully.
Eight LAN Ports
3. Link and Activity
(left side of port)
On (Green)
Blinking
(Green)
Off
The port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the port.
The port has no link.
4. Speed
(right side of port)
On (Green)
On (Amber)
Off
The LAN port is operating at 1,000 Mbps.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 10 Mbps.
5. DMZ On (Green)
Off
LAN port 8 is enabled as a DMZ port.
LAN port 8 is not enabled as a DMZ port.
One WAN Port
6. Active
(left side of port)
On (Green)
Off)
The WAN port is connected.
The Internet connection is down The WAN port is either not
enabled or has no link.
7. Speed
(right side of port)
On (Green)
On (Amber)
Off
The port is operating at 1,000 Mbps.
The port is operating at 100 Mbps.
The port is operating at 10 Mbps.
Figure 1-2
1
2
3