User's Manual

NETGEAR JDGN1000 User Manual
6
Indicator Color Status Description
On WLAN is enabled.
Blink
Data is being transmitted through the
wireless interface.
WLAN Green
Off WLAN is disabled.
On
Connection succeeds under Wi-Fi
Protected Setup.
Blink
Negotiation is in progress under Wi-Fi
Protected Setup.
WPS Green
Off Wi-Fi Protected Setup is disabled.
3.1.2 Rear Panel
Figure 2 Rear panel
The following table describes the interfaces or the buttons on the rear panel.
Interface Description
Line RJ-11 port, for connecting the ADSL cable.
WLAN WLAN switch, for enabling or disabling the WALN function.
RESET
Press the button for at least 1 second and then release it. System
restores the factory default settings.
WPS
This button is used for enabling WPS PBC mode. If WPS is enabled,
press this button, and then the wireless router starts to accept the
negotiation of PBC mode.
LAN 4~1
RJ-45 port, for connecting the router to a PC or another network
device.
Power Power interface, for connecting the power adapter.
ON/OFF Power switch
Warning: