User's Manual

NETGEAR JDGN1000 User Manual
77
Click Save/Apply to save and apply the settings.
5.6.8 Static Routes
Choose Advanced > Static Routes and the following page appears.
Figure 109 Static route setup
In this page, you can add or remove a static routing rule of IPV4.
Click the Add button to display the following page.
Figure 110 Adding a static routing rule
 IP Version: Select the IP version to be IPv4.
 Destination IP address/prefix length: Enter the destination IP address.
 Interface: select the proper interface for the rule.
 Gateway IP Address: The next-hop IP address.
 Metric: The metric value of routing.
After finishing setting, click Apply/Save to save and apply the settings.
5.6.9 Remote Management
Choose Advanced > Remote Management and the following page appears.