User's Manual

NETGEAR JDGN1000 User Manual
71
In this page, you can modify the IP address of the device. The preset IP address is
192.168.1.1.
Configuring the DHCP Server
Figure 98 Setting the DHCP server
If you enable the DHCP sever, the clients will automatically acquire the IP address
from the DHCP server. If the DHCP server is disabled, you need to manually set the
start IP address, end IP address and the lease time for the clients in the LAN.
Configuring the DHCP Static IP Lease List
The lease list of static IP address can reserve the static IP addresses for the hosts
with the specific MAC addresses. When a host whose MAC address is in the lease
list of static IP address requests the DHCP server for an IP address, the DHCP server
assigns the reserved IP address to the host.
Figure 99 DHCP static IP lease list
Click the Add Entries button in the LAN Setup page to display the following
page.
Figure 100 Adding an entry of DHCP static IP lease list