User's Manual

NETGEAR JDGN1000 User Manual
67
Enter an IP address in the Server IP Address field, to appoint the corresponding
PC to receive forwarded packets.
The port table displays the ports that you want to open on the device. The Protocol
indicates the type of protocol used by each port.
Click Save/Apply to save the settings. The page as shown in the following figure
appears. A virtual server is added.
Figure 92 Adding a virtual server
Port Triggering
Select Port Triggering and the following page appears.
Figure 93 Port Triggering setup
In this page, you may add or delete an entry of port triggering.
Click the Add button to display the following page.