User's Manual

NETGEAR JDGN1000 User Manual
64
Note:
The advanced wireless setting is only for the advanced user. For the common user,
do not change any settings in this page.
Click Setup MAC Filter to display the following page.
Figure 87 MAC filter configuration
This page is used to allow or reject the wireless clients to access the wireless network
of the wireless router.
In this page, you can add or remove the MAC filters.
The MAC restrict modes include Disabled, Allow, and Deny.
 Disabled: Disable the wireless MAC address filtering function.
 Allow: Allow the wireless clients with the MAC addresses in the MAC
Address list to access the wireless network of the wireless router.
 Deny: Reject the wireless clients with the MAC addresses in the MAC
Address list to access the wireless network of the wireless router.
Click the Add button to display the following page.