User's Manual

NETGEAR JDGN1000 User Manual
45
Figure 57 IPoA summary
Step10 In this page, it displays the information about the IPoA settngs. Click
Apply/Save to save and apply the settings, and then the following page
appears. You can modify the settings by clicking the Back if necessary.
Figure 58 Completing the settings of IPoA WAN service
Adding a Bridge WAN service
This section describes the steps for adding the Bridge WAN service.
Step1 In the Wide Area Network (WAN) Service Setup page, click Add to
display the following page. (At first, you must add a proper ATM
configuration for this WAN service.) Click Add to display the following
page.