User's Manual
Table Of Contents
- ProSafe Dual Band Wireless-N Access Point WNDAP360
- Contents
- 1. Introduction
- 2. Installation and Basic Configuration
- 3. Wireless Configuration and Security
- 4. Management
- 5. Advanced Configuration
- 6. Troubleshooting
- Basic Functioning
- You Cannot Access the Internet or the LAN from a Wireless-Capable Computer
- You Cannot Configure the Wireless Access Point from a Browser
- When You Enter a URL or IP Address a Time-Out Error Occurs
- Troubleshooting a TCP/IP Network Using the Ping Utility
- Problems with Date and Time
- Use the Packet Capture Tool
- A. Supplemental Information
- B. Command-Line Reference
- C. Notification of Compliance
- Index
Introduction
7
ProSafe Dual Band Wireless-N Access Point WNDAP360
range of another. As a result, wireless clients can freely roam from one wireless access point
to another and still maintain seamless connection to the network.
The autosensing capability of the ProSafe Dual Band Wireless-N Access Point WNDAP360
a
llo
ws packet transmission at up to 300 Mbps, or at reduced speeds to compensate for
distance or electromagnetic interference.
What Is In the Box?
The product package should contain the following items:
• ProSafe Dual
Band Wireless-N Access Point WNDAP360
• Power adapter an
d cord (12 VCD, 1.0A)
• Straight-through Category 5 Ethernet cable
•
ProSafe Dual
Band Wireless-N Access Point WNDAP360 Installation Guide
• Resource CD, which includes this man
ual
• Wall-mount kit made up of brackets and hardware
Con
tact your reseller or customer support in your ar
ea if there are any missing or damaged
parts.
Refer to the NETGEAR website at http://kbserver.netgear.
com/main.asp for the telephone
number of customer support in your area. You should keep the Installatio
n Guide, along with
the original packing materials, and use the packing materials to repack the wireless access
point if you need to return it for repair.
To qualify for product updates and product warranty
, NETGEAR en
courages you to register
on the NETGEAR website at http://my.netgear.com/re
gistration/login.aspx.
System Requirements
Before installing the wireless access point, make sure that your system meets these
requirements:
• A 10/100/100
0 Mbps local area network device such as a hub or switch
• The Category 5 UTP stra
ight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100–120V, 50–60 Hz AC power source
•
A Web browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or
Mozilla 1.5 o
r later
• At least one computer with the TCP/IP protocol installed
•
An 802.11a/n or 802.11b/g/n-compliant device, such as the NETGEAR® RangeMax™
W
ireless-N Dual Band USB Adapter WNDA3100v2.