User's Manual
Table Of Contents
- ProSafe Dual Band Wireless-N Access Point WNDAP360
- Contents
- 1. Introduction
- 2. Installation and Basic Configuration
- 3. Wireless Configuration and Security
- 4. Management
- 5. Advanced Configuration
- 6. Troubleshooting
- Basic Functioning
- You Cannot Access the Internet or the LAN from a Wireless-Capable Computer
- You Cannot Configure the Wireless Access Point from a Browser
- When You Enter a URL or IP Address a Time-Out Error Occurs
- Troubleshooting a TCP/IP Network Using the Ping Utility
- Problems with Date and Time
- Use the Packet Capture Tool
- A. Supplemental Information
- B. Command-Line Reference
- C. Notification of Compliance
- Index
Wireless Configuration and Security
52
ProSafe Dual Band Wireless-N Access Point WNDAP360
Figure 27.
2. Specify the settings as explained in the following table:
Table 14. RADIUS Server Settings
Field Descriptions
RADIUS Server Settings
Primary
Authentication Server
IP Address Enter the IP address of the primary RADIUS server for
authentication.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to a
ccess the primary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and
the primary RADIUS server during authentication.
Secondary
Authentication Server
IP Address Enter the IP address of the secondary RADIUS server for
authenti
cation. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to acce
ss the secondary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and
the secondary RADIUS server during authentication.
Primary
Accounting Server
IP Address Enter the IP address of the primary RADIUS server for accounting.
Authentication
Port
Enter the UDP port number of the wireless access point that is used
to a
ccess the primary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
and the
primary RADIUS server during the accounting process.