User's Manual
Table Of Contents
- ProSafe Dual Band Wireless-N Access Point WNDAP360
- Contents
- 1. Introduction
- 2. Installation and Basic Configuration
- 3. Wireless Configuration and Security
- 4. Management
- 5. Advanced Configuration
- 6. Troubleshooting
- Basic Functioning
- You Cannot Access the Internet or the LAN from a Wireless-Capable Computer
- You Cannot Configure the Wireless Access Point from a Browser
- When You Enter a URL or IP Address a Time-Out Error Occurs
- Troubleshooting a TCP/IP Network Using the Ping Utility
- Problems with Date and Time
- Use the Packet Capture Tool
- A. Supplemental Information
- B. Command-Line Reference
- C. Notification of Compliance
- Index
Wireless Configuration and Security
48
ProSafe Dual Band Wireless-N Access Point WNDAP360
Configure Legacy 802.1X
To use legacy 802.1X security, you need to define RADIUS server settings. For information
about RADIUS servers, see Configure RADIUS Server Settings on page 51
.
When you select Legacy 8
02.1X from the Network Authentication drop-down list, the Data
Encryption drop-down list becomes nonoperational (it shows None only). You need to define
the RADIUS servers only to use legacy 802.1X security.
Figure 20.
Table 11. WEP Encryption Settings
Field Descriptions
Data Encryption Select the encryption key size from the drop-down list:
• 64-bit WEP. S
tandard WEP encryption, using 40/64-bit encryption.
• 128-bit WEP. S
tandard WEP encryption, using 104/128-bit encryption.
• 152-bit WEP. Proprietary WEP encryption mode, using 128+24 bits encryption. This
mode functions only with other wireless station that support this mode.
Passphrase Enter a passphrase. The passphrase length needs to
be between 8 and 63 characters
(inclusive). The secret passphrase allows you to automatically generate the keys by
clicking Generate Keys. The default passphrase is sharedsecret.
You can display the actual passphrase by selecting the Show Pas
sphrase in Clear Text
radio button.
Encryption Key
(Key1–Key4)
Either manually enter a key or allow the key to be
automatically generated by clicking
Generate Key.
• For ASCII format, depending on the key size selected, the manually entered encryption
key needs to
have a length of 5 (64-bit WEP), 13 (128-bit WEP), or 16 (152-bit WEP)
characters.
• For HEX format, depending on the key size selected, the manually entered or
automatically g
enerated encryption key needs to have a length of 10 (64-bit WEP),
26 (128-bit WEP), or 32 (152-bit WEP) characters.
Note: Wireless stations need to use the key
to access
the wireless access point.
Note: Not all wireless adapters support passphrase key generation.
Show Passphrase in
Clear T
ext
Select the Yes radio button to display the actual passphrase in the Passphrase field. The
default setting is No.