User's Manual
Table Of Contents
- ProSafe Dual Band Wireless-N Access Point WNDAP360
- Contents
- 1. Introduction
- 2. Installation and Basic Configuration
- 3. Wireless Configuration and Security
- 4. Management
- 5. Advanced Configuration
- 6. Troubleshooting
- Basic Functioning
- You Cannot Access the Internet or the LAN from a Wireless-Capable Computer
- You Cannot Configure the Wireless Access Point from a Browser
- When You Enter a URL or IP Address a Time-Out Error Occurs
- Troubleshooting a TCP/IP Network Using the Ping Utility
- Problems with Date and Time
- Use the Packet Capture Tool
- A. Supplemental Information
- B. Command-Line Reference
- C. Notification of Compliance
- Index
Wireless Configuration and Security
43
ProSafe Dual Band Wireless-N Access Point WNDAP360
The following table explains the fields of the Profile Settings screen:
3. To configure a wireless security profile, select the corresponding radio button to the left of
the wireless
security profile. The Edit Security Profile screen opens for the selected wireless
security profile (see the following figure). The first section on the screen is the Profile
Definition section; the second section is the Authentication Settings section. These sections
are explained separately.
Figure 17.
Table 8. Profile Settings Screen
Field Description
Profile Name The unique name of the wireless security profile that makes it easy to
recognize the profile.
SSID The wireless network name (SSID) for the wireless security profile.
Security The configured wireless authentication method for the wireless security
prof
ile.
VLAN The default VLAN ID that is associated with the wireless security profile.
Enable The check box that lets you select the wireless security profile so you can
enabl
e it by clicking Apply.