User's Manual
Table Of Contents
- ProSafe Dual Band Wireless-N Access Point WNDAP360
- Contents
- 1. Introduction
- 2. Installation and Basic Configuration
- 3. Wireless Configuration and Security
- 4. Management
- 5. Advanced Configuration
- 6. Troubleshooting
- Basic Functioning
- You Cannot Access the Internet or the LAN from a Wireless-Capable Computer
- You Cannot Configure the Wireless Access Point from a Browser
- When You Enter a URL or IP Address a Time-Out Error Occurs
- Troubleshooting a TCP/IP Network Using the Ping Utility
- Problems with Date and Time
- Use the Packet Capture Tool
- A. Supplemental Information
- B. Command-Line Reference
- C. Notification of Compliance
- Index
Supplemental Information
113
ProSafe Dual Band Wireless-N Access Point WNDAP360
Table 30. Default Configuration Settings WNDAP360
Feature Description
Login
User login URL 192.168.0.100
User name (case-sensitive) admin
Login password (case-sensitive) password
Ethernet Connection
Static IP address 192.168.0.210
Ethernet MAC address See bottom label.
Port speed 10/100/1000
Local Network (LAN)
LAN IP address 192.168.0.100
Subnet mask 255.255.255.0
Gateway address 0.0.0.0
DHCP server Disabled
DHCP client Disabled
Time zone USA-Pacific
SNMP Disabled
Spanning Tree Protocol Disabled
Secure Shell (SSH) Enabled
Secure Telnet Disabled