User's Manual

1-1
v1.0, April 2011
Chapter 1
Configuring Your Internet Connection
This chapter describes how to configure your WNR3500Lv2 router Internet connection. When you
install your wireless router, these settings are configured automatically for you. This chapter
provides instructions on how to log in to the wireless router for further configuration.
This chapter includes the following sections:
• “Logging In to Your Wireless Router” on page 1-2
• “Using the Setup Wizard” on page 1-5
• “Using the Setup Wizard” on page 1-5
• “Viewing or Manually Configuring Your ISP Settings” on page 1-5
Logging In to Your Wireless Router
You can log in to the wireless router to view or change its settings.
Note: NETGEAR recommends using the Smart Wizard™ on the Resource CD for initial
configuration, as described in the NETGEAR Wireless Router Setup Manual.
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online
document in “Preparing Your Network” in Appendix B.