User's Manual
Table Of Contents
- ProSafe Wireless-N Access Point WNAP320
- Contents
- 1. Introduction
- 2. Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNAP320 Wireless Security Options
- Installing theWireless Access Point
- Deploying the ProSafe Wireless Access Point
- Mounting the ProSafe Wireless Access Point Using the Wall Mount Kit (Optional)
- Setting Basic IP Options
- Configuring Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- 3. Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Configuration File Management
- Restoring the WNAP320 to the Factory Default Settings
- Changing the Administrator Password
- Enabling the Syslog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing and Saving AP Lists
- 4. Advanced Configuration
- 5. Troubleshooting and Debugging
- No lights are lit on the product family.
- No lights are lit on the access point.
- The Wireless LAN LED does not light up.
- The Wireless LAN activity light does not light up.
- The Ethernet LAN LED is not lit.
- I cannot access the Internet or the LAN with a wireless-capable computer.
- I cannot connect to the WNAP320 to configure it.
- When I enter a URL or IP address, I get a time-out error.
- Using the Restore Factory Settings Button to Restore Default Settings
- A.
- A. Supplemental Information
- C. Compliance Notification
24 | Chapter 4. Advanced Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
• Fragmentation Length (256 – 2346). This is the maximum packet size. Packets
larger than the size specified in this field will be fragmented. The Fragment length
value must be larger than the RTS Threshold value. The default is 2346.
• Beacon Interval (100 – 1000). The time interval between 100 ms and 1000 ms for
each beacon transmission, which allows the access point to synchronize the wireless
network. The default is 100.
• Aggregation Length (1024 – 65535). The aggregation length defines the size of
aggregated packets. Larger aggregation lengths can sometimes lead to better
network performance. The default is 65535.
• AMPDU. Aggregated MAC Protocol Data Unit. Aggregates several MAC frames into
a single large frame to achieve higher throughput. The default is enabled.
• RIFS Transmission. Reduced Interframe Space. RIFS transmissions are shorter
than other interframe spaces, and if this feature is enabled the access point will allow
transmission of successive frames at different transmit powers. The default is
disabled.
• DTIM Interval. The Delivery Traffic Indication Message. Specifies the data beacon
rate between 1 and 255. The default is 3.
• Preamble Type. A long transmit preamble can provide a more reliable connection or
a slightly longer range. A short transmit preamble gives better performance. The Auto
settings automatically handles both long and short preambles. The default is Auto.
3. Click Apply to enable the wireless settings.