User's Manual
Table Of Contents
- ProSafe Wireless-N Access Point WNAP320
- Contents
- 1. Introduction
- 2. Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNAP320 Wireless Security Options
- Installing theWireless Access Point
- Deploying the ProSafe Wireless Access Point
- Mounting the ProSafe Wireless Access Point Using the Wall Mount Kit (Optional)
- Setting Basic IP Options
- Configuring Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- 3. Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Configuration File Management
- Restoring the WNAP320 to the Factory Default Settings
- Changing the Administrator Password
- Enabling the Syslog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing and Saving AP Lists
- 4. Advanced Configuration
- 5. Troubleshooting and Debugging
- No lights are lit on the product family.
- No lights are lit on the access point.
- The Wireless LAN LED does not light up.
- The Wireless LAN activity light does not light up.
- The Ethernet LAN LED is not lit.
- I cannot access the Internet or the LAN with a wireless-capable computer.
- I cannot connect to the WNAP320 to configure it.
- When I enter a URL or IP address, I get a time-out error.
- Using the Restore Factory Settings Button to Restore Default Settings
- A.
- A. Supplemental Information
- C. Compliance Notification
34 | Chapter 3. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Viewing Network Traffic Statistics
The Statistics screen displays information for both wired (LAN) and wireless (WLAN)
interface network traffic.
To access statistics information:
1. Select Monitoring > Statistics. The Statistics screen displays, as shown in Figure 12, .
Figure 12.
2. Click Refresh to update the statistics information for each interface. .
Table 2 describes the information fields detailed on the Statistics screen.
Table 2. Statistics Fields
Field Description
Wired Ethernet
Packets The number of packets sent and received since the WNAP320 was
restarted.
Bytes The number of bytes sent and received since the WNAP320 was restarted.
Wireless 11n/g