User's Manual

N300 Wireless Router WNR2000v3 User Manual
Safeguarding Your Network 2-18
v1.0, September 2010
3. For the non-WPS devices that you want to connect, open the networking utility and follow the
utility’s instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/
PSK + WPA2/PSK security method, and passphrase).
4. For the WPS devices that you want to connect, follow the procedure “Using a WPS Button to
Add a WPS Client” on page 2-14 or “Using PIN Entry to Add a WPS Client” on page 2-15.
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the wireless router.
5. To view a list of all devices connected to your wireless router (including wireless and
Ethernet-connected), see “Viewing a List of Attached Devices” on page 4-10.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the WPS Settings
screen.