User's Manual
Table Of Contents
- N300 Wireless Router WNR2000v3 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Safeguarding Your Network
- Chapter 3 Protecting Your Network
- Chapter 4 Using Network Monitoring Tools
- Chapter 5 Customizing Your Network Settings
- Chapter 6 Fine-Tuning Your Network
- Chapter 7 Troubleshooting
- Appendix A Default Configuration and Technical Specifications
- Appendix B Related Documents
- Index
N300 Wireless Router WNR2000v3 User Manual
Troubleshooting 7-13
v1.0, September 2010
9. Select Advanced Wireless Settings under Advanced in the main menu of the WNR2000v3
router.
10. Make sure the Enable Wireless Router Radio check box is selected.
11. Click Setup Access List.
12. Make sure that the Turn Access Control On check box is not selected.
13. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that you
configured in the router, and disable encryption. Check that your computer has a wireless link
and can obtain an IP address by DHCP from the router.
Once your computer has basic wireless connectivity to the router, you can configure the advanced
wireless security functions of the computer and router (for more information about security, see
Chapter 2, “Safeguarding Your Network”).
Figure 7-2