User's Manual

Appendix B. NETGEAR VPN Configuration | 165
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 User Manual
Figure 64. Telecommuter Example
Setting Up Client-to-Gateway VPN (Telecommuter
Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN client and a
network gateway involves two steps, described in the following sections:
• Step 1: Configure Gateway A (VPN Router at Main Office) on page 166.
• Step 2: Configure Gateway B (VPN Router at Regional Office) on page 167 describes
configuring the NETGEAR ProSafe VPN client endpoint.
Gateway Fully qualified domain name (FQDN)
Client Dynamic
Gateway A
(main office)
Gateway B
LAN IP
192.168.0.1
192.168.0.1/24
FQDN
ntgr.dyndns.org
“from_GW_A”
WAN IP
Internet
WAN IP
0.0.0.0
“toGW_A”
IP: 192.168.2.3
(regional office)
Client PC
(running NETGEAR
ProSafe VPN client)
Table 26. Configuration Summary (Telecommuter Example)
VPN Consortium Scenario Scenario 1