User's Manual

78 | Chapter 6. USB Storage
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 User Manual
Configuring USB Storage Advanced Settings
To configure advanced USB settings, from the router menu, under USB, select Advanced
Settings. The USB Storage (Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage Advanced Settings screen.
Table 14. USB Storage Advanced Settings
Fields Description
Network Device Name The default is readyshare. This is the name used to access the USB
device connected to the wireless modem router from your computer.
Workgroup If you are using a Windows Workgroup rather than a domain, the
workgroup name is displayed here.
Access Method Network
Connection
Enabled by default, this allows all users on the LAN to have access
to the USB drive.
HTTP Disabled by default. If you enable this setting, you can type
http://readyshare to access the USB drive.
HTTP (via
Internet)
Disabled by default. If you enable this settings, remote users can
type http://readyshare to access the USB drive over the Internet.
FTP Disabled by default.
FTP (via
Internet)
Disabled by default. If you enable this settings, remote users can
access the USB drive via FTP over the Internet.