User's Manual

Chapter 3. Wireless Settings | 41
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 User Manual
Wireless Settings Screen
The Wireless Settings screen lets you view or configure the wireless network configuration.
Once you have established basic wireless connectivity, you can enable security settings
appropriate to your needs.
Note: If you use a wireless computer to change the wireless network
name (SSID) or other wireless security settings, you are
disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the modem router.
Consider Every Device on Your Network
Before you begin, check the following:
• Every wireless computer has to be able to obtain an IP address by DHCP from the router
as described in Use Standard TCP/IP Properties for DHCP on page 23.
• Each computer or wireless adapter in your network must have the same SSID and
wireless mode (bandwidth/data rate) as the router. Check that the wireless adapter on
each computer can support the mode and security option you want to use.
• The security option on each wireless device in the network must match the router. For
example, if you select a security option that requires a passphrase, be sure to use same
passphrase for each wireless computer in the network.