User's Manual

© 2010 by NETGEAR, Inc. All rights reserved.
Power LED
Wireless Speed LED
WPS LED
Their behaviors are:
Power LED:
- flashing green(quick, 0.2 sec) > unit booting with normal firmware
- flashing green(slow, 0.8 sec) > unit ready, but no STA associated for AP, or STA not
associated with AP
- Solid green: AP and STA associated.
Wireless Speed LED:
AP:
- Solid green: At least 1 client is associated with the AP
- OFF if AP has no STA associated with it.
STA:
- solid red when strength is very weak
- solid orange when speed is less than 50Mbps
- solid green when speed is more than 50Mbps
- OFF if STA is not associated with any AP
WPS LED:
Blinking: WPS in progress
3-way Switch on the back panel
Auto/Access Point/Station