User's Manual
Table Of Contents
- Wireless-N 150 Router WNR612v2 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Basic Connectivity
- Chapter 2 Safeguarding Your Network
- Choosing Appropriate Wireless Security
- Recording Wireless-N 150 Settings Setup Information
- Changing Wireless Security Settings
- Viewing Advanced Wireless Settings
- Configuring WPS Security (Wi-Fi Protected Setup)
- Restricting Wireless Access by MAC Address
- Changing the Administrator Password
- Backing Up Your Configuration
- Understanding Your Firewall
- Chapter 3 Restricting Access From Your Network
- Chapter 4 Customizing Your Network Settings
- Chapter 5 Fine-Tuning Your Network
- Chapter 6 Using Network Monitoring Tools
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 150 Router WNR612v2 User Manual
Safeguarding Your Network 2-6
v1.0, March 2010
– Passphrase. ______________________________ These characters are case-sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are also set to WPA-PSK and are configured
with the correct passphrase. Similarly, when you use WPA2-PSK, the other devices in the
network will not connect unless they are also set to WPA2-PSK and are configured with
the correct passphrase.
Use the procedures described in the following sections to specify the WNR612v2 router. Store this
information in a safe place.
Changing Wireless Security Settings
This section describes the wireless settings that you can view and configure in the Wireless
Settings screen, which you access under Setup in the main menu.
Viewing Wireless-N 150 Settings
To specify the wireless security settings of your router:
1. Log in to the router as described in “Logging In To Your Wireless Router” on page 1-1.
2. Select Wireless Settings under Setup in the main menu. The Wireless Settings screen
displays.
The available settings in this screen are:
Figure 2-2