User's Manual
Table Of Contents
- Wireless-N 150 Router WNR612v2 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Basic Connectivity
- Chapter 2 Safeguarding Your Network
- Choosing Appropriate Wireless Security
- Recording Wireless-N 150 Settings Setup Information
- Changing Wireless Security Settings
- Viewing Advanced Wireless Settings
- Configuring WPS Security (Wi-Fi Protected Setup)
- Restricting Wireless Access by MAC Address
- Changing the Administrator Password
- Backing Up Your Configuration
- Understanding Your Firewall
- Chapter 3 Restricting Access From Your Network
- Chapter 4 Customizing Your Network Settings
- Chapter 5 Fine-Tuning Your Network
- Chapter 6 Using Network Monitoring Tools
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 150 Router WNR612v2 User Manual
Configuring Basic Connectivity 1-14
v1.0, March 2010
9. Make sure that the Turn Access Control On check box is not selected.
10. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that you
specified in the router, and disable encryption. Check that your computer has a wireless link
and can obtain an IP address by DHCP from the router.
Once your computer has Wireless-N 150 connectivity to the router, you can configure the
advanced wireless security functions of the computer and router (for more information about
security and these settings, see Chapter 2, “Safeguarding Your Network ”).