User's Manual

Wireless-N 150 Router WNR612v2 User Manual
Index-4
v1.0, March 2010
power adapter specifications A-3
Power light, troubleshooting and 7-2
Powerline HD products 5-17
PPPoE (PPP over Ethernet) 1-8
PPTP (Point to Point Tunneling Protocol) 1-8
Preamble mode 2-12
primary DNS server 1-6, 1-9
protocols, compatibility A-3
Push ’N’ Connect 2-12
R
radio, wireless 1-11, 2-11, 6-4
range, router 5-14
reducing interference 5-14
reference documents B-1
region of operation 2-7
registering product ii
releasing connection status 6-5
remote devices, testing path 7-9
remote management 6-12
renewing connection status 6-5
requirements, speed 5-17
reserved IP adresses 4-4
restarting network 7-1
restoring
configuration 6-8
default factory settings 7-11
restoring firmware 7-3
restricting access by MAC address 2-17
revision history xiii
RIP (Router Information Protocol) direction 4-2
route name 4-10
router PIN 2-14, 2-15
router status, viewing 6-2
S
scheduling blocking 3-5
secondary DNS server 1-6, 1-9
security
options, compared 2-2
setting up 2-1
security PIN 2-14, 2-15
service name 1-8
service numbers 3-4
services, blocking 3-3
setting time 3-8
settings, default. See default factory settings
setup information, gathering 2-5
Setup Wizard 1-4
Shared Key authentication 2-5, 2-8
SMTP server 3-7
specifications
technical A-1
speed requirements 5-17
SPI (Stateful Packet Inspection) firewall 4-6
spoofing MAC addresses 1-6, 7-6
SSID 1-10, 2-7, 6-4
SSID broadcast 1-11, 2-11
standards, compatibility A-3
static IP addresses 1-6
static routes 4-8
statistics, usage 6-6
status, viewing 6-2
streaming video and audio 5-17
subnet mask 4-2, 6-3
system up time
6-6
T
TCP/IP network, troubleshooting 7-8
technical specifications A-1
Telstra Bigpond 1-8