User's Manual
Table Of Contents
- Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
- Contents
- About This Manual
- Chapter 1 Connecting
- Using Intel Wireless Display
- Step 1: Opening Intel Wireless Display on the Laptop
- Step 2: Windows Firewall Security Alert
- Step 3: Consenting to the License Agreement
- Step 4: Scanning for Adapters
- Step 5: Detected Adapter
- Detected Adapters Column Information
- Step 6: Connecting to the TV
- Step 7: Connected to the Adapter
- Step 8: Ready to Use Intel Wireless Display
- First Time Connection Procedures
- Using Intel Wireless Display
- Chapter 2 Troubleshooting
- Initial Set Up Problems
- Intel Wireless Display Requires a Different Security Profile
- Common Solutions to Many Issues
- Known Issues
- FAQs
- How do I Change the Adapter Display Language
- How do I Update the Firmware?
- How do I Reset the Application Settings?
- How do I Reset the Adapter?
- How do I Clear the Adapter Memory?
- Can I Close the Laptop Lid and Still Use Intel Wireless Display?
- What are Adapter Properties?
- Audio/Visual Tuning
- Why does My Laptop's Color Look Different on My TV?
- How do I Adjust the TV Display Image?
- How do I Adjust the Audio?
- Sample Audio Testing
- Global Volume Control
- Windows Audio Mixer
- Changing the Sound using the Windows Control Panel
- How do I Train My Displays?
- Can I play DVDs with Intel Wireless Display?
- How do I Contact Customer Support?
- What is Auto-Connect
- Appendix A Default Configuration and Technical Specifications
- Appendix B Related Documents
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
2-8
v1.0, November 2009
2. Shut down the laptop, restart, open the application, scan for available adapters, and connect.
3. Reset the adapter, scan for available adapters, and connect. For help resetting the adapter, see
“How do I Reset the Adapter?” on page 2-9.
4. Check the laptop’s firewall settings. A firewall may be blocking the application. For firewall
help, see “Firewall Issues” on page 2-6.
5. Try updating the firmware. For firmware update instructions, see “How do I Update the
Firmware?” on page 2-9.
Known Issues
This section lists known Intel Wireless Display issues and workarounds.
• After disconnecting from the application, it may be necessary to manually enable the laptop's
sound. For audio help see
“How do I Adjust the Audio?” on page 2-11.
• The application will usually not work if it is located in the Windows startup group.
• Wait until Microsoft Windows has fully booted before opening Intel Wireless Display.
• If the media application in use can only be set to mute or unmute both the laptop and TV at the
same time, it is recommended to use a different media application.
• Pressing Control + Alt + Delete on the laptop might freeze the TV image.
• For analog TVs, the adapter does not support NTSC (National Television System Committee)
format 4.43 variations on the composite interface. See the TV owner’s manual for NTSC
variation information.
• Changing the wireless LAN or connection settings when Intel Wireless Display is connected
may cause momentary disruption of or end the connection.
FAQs
Look through the FAQ contents for a topic that comes closest to describing your problem. If you
are unable to resolve the problem after reading through the FAQ topics, search the
Troubleshooting topics. For additional help, visit
http://kbserver.netgear.com/products/PTV1000.asp