User's Manual
Table Of Contents
- NETGEAR Wireless N150 Access Point WN604 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Chapter 3
- Understanding Security Profiles
- Wi-Fi Protected Setup (WPS)
- Configuring Security Manually
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WN604 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless N150 Access Point WN604 Reference Manual
5-2 Advanced Configuration
v1.0, March 2010
Click Wireless > Basic > Scheduled Wireless ON/OFF on the main menu. The Scheduled
Wireless ON/OFF screen displays.
Follow the steps below to schedule wireless on your WN604:
1. Enable Scheduled Wireless ON/OFF by clicking the On radio button. The default is On.
2. Radio Off Schedule: Click any of the weekday checkboxes to set the WN604’s radio off on
that weekday(s).
3. Enter the Radio ON Time and Radio OFF Time to set the period that the WN604’s radio will
be enabled on the days not checked in the previous option. The default is ON for the whole
day.
4. Click Apply.
Configuring Advanced Wireless Settings
The Advanced option of the Wireless Settings menu is used to configure and enable various
wireless LAN parameters for the 802.11b/bg/ng modes. The default wireless LAN parameters
usually work well. However, you can use these settings to fine tune the overall performance of
your wireless access point for your environment.
The Wireless Settings option of the Advanced menu is used to configure the Wireless LAN
parameters. The default advanced wireless LAN parameter settings usually work well.
Figure 5-1