User's Manual
Table Of Contents
- NETGEAR Wireless N150 Access Point WN604 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Chapter 3
- Understanding Security Profiles
- Wi-Fi Protected Setup (WPS)
- Configuring Security Manually
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WN604 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless N150 Access Point WN604 Reference Manual
Management 4-11
v1.0, March 2010
2. Click Refresh to update the Statistics information for each interface. .
Table 4-2, shown below, describes the information fields detailed on the Statistics screen.
Figure 4-9 View network statistics
Table 4-2. Statistics Fields
Field Description
Wired Ethernet
Packets The number of packets sent and received since the WN604 was restarted.
Bytes The number of bytes sent and received since the WN604 was restarted.
Wireless 11b/bg/ng
Unicast Packets The Unicast packets sent and received in 802.11n/g mode since the WN604
was restarted.
Broadcast Packets The Broadcast packets sent and received in 802.11n/g mode since the
WN604 was restarted.
Multicast Packets The Multicast packets sent and received in 802.11n/g mode since the
WN604 was restarted.