User's Manual
Table Of Contents
- NETGEAR Wireless N150 Access Point WN604 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Chapter 3
- Understanding Security Profiles
- Wi-Fi Protected Setup (WPS)
- Configuring Security Manually
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WN604 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless N150 Access Point WN604 Reference Manual
Introduction 1-7
v1.0, March 2010
Table 1-1. Front Panel LED Indicators
Item LED DESCRIPTION
1Power Power Indicator
OFF No power.
Solid
Amber
AP performing the power on self-test diagnostic.
Solid
Green
Power ON and AP ready
Blinking
Green
Firmware upgrade in process
2W-Fi WPS
Function
WPS LED
OFF There is no WPS activity or WPS error and the AP is not in the temporary
AP setup locked state
Blinking
Green
There are WPS activities.(0.5 sec on and 0.5 sec off)
3 802.11b/g/N WLAN LED
Blinking
Blue
Data transmission or receive activity occurs through the wireless
Solid Blue Wireless is up and running without wireless data transmission
OFF Wireless Interface is turned off
4 4* 10/100 LAN Link/Active LED
OFF No link detected.
Solid
Green
100 Mbps link detected, no data transmission on the port.
Blinking
Green
100 Mbps link detected, data transmission on the port.
Solid
Amber
10 Mbps link detected, no data transmission on the port.
Blinking
Amber
10 Mbps link detected, data transmission on the port.