User's Manual
Table Of Contents
- NETGEAR Wireless N150 Access Point WN604 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Chapter 3
- Understanding Security Profiles
- Wi-Fi Protected Setup (WPS)
- Configuring Security Manually
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WN604 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless N150 Access Point WN604 Reference Manual
1-2 Introduction
v1.0, March 2010
Supported Standards and Conventions
The following standards and conventions are supported:
• Standards Compliance. The Wireless Access Point complies with the IEEE 802.11b/g/n
standards for Wireless LANs.
• Wi-Fi Protected Setup support. Wi-Fi Protected Setup (WPS) support, a standard created
and certified by the Wi-Fi Alliance for easy and secure home wireless network configuration.
• Full WPA and WPA2 support. WPA and WPA2 enterprise-class strong security with
RADIUS and certificate authentication as well as dynamic encryption key generation.WPA-
PSK and WPA2-PSK preshared key authentication without the overhead of RADIUS servers
but with all of the strong security of WPA.
• DHCP Client Support. DHCP provides a dynamic IP address to PCs and other devices upon
request. The WN604 can act as a client and obtain information from your DHCP server; it can
also act as a DHCP server and provide network information for wireless clients.
• LAN ports. 4 x 10/100 LAN ports support.
Key Features
The WN604 provides solid functionality, including the following features:
• Operating Frequency. The Wireless Access Point operates in the standard 2.4 GHz band. It
has Multiple operating modes:
– Wireless Access Point. Operates as a standard 11b/bg/ng access point.
– Point-to-Point Bridge. In this mode, the WN604 only communicates with another bridge-
mode wireless access point (with or without clients). Network authentication should be
used to protect this communication.
– Point-to-Multi-Point Bridge. In this mode the WN604 is the “Master” for a group of
bridge-mode wireless access points. The other bridge-mode wireless access points send all
traffic to this “Master”, and do not communicate directly with each other. Network
Authentication should be used to protect this traffic.
– Client mode. In this mode the access point acts as a client. It is used to extend the LAN of
clients that do not have wireless connectivity
• Scheduled Wireless ON/OFF. Schedule wireless to be ON/OFF through certain days of the
week and hours of each weekday.