User's Manual
Table Of Contents
- NETGEAR Wireless N150 Access Point WN604 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Chapter 3
- Understanding Security Profiles
- Wi-Fi Protected Setup (WPS)
- Configuring Security Manually
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 4 Management
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WN604 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless N150 Access Point WN604 Reference Manual
Index-2
v1.0, March 2010
beacon interval 5-4
bridge
network authentication 3-3
bridge mode wireless station
wireless point to point bridge 5-6
wireless point-to-multi-point bridge 5-7
BSSID 4-12
C
Category 5 Ethernet cable 1-5
change password 4-6
channel auto
testing connectivity 2-18
channel auto selection 2-18
channel interference 2-18
channel spacing 2-2
channel spacing, recommended 2-15
channel, auto
configuring channel/frequency 2-15
channel, default 2-15
configuration file 4-3
conventions, typographical 1-xi
country/region, configure 2-6
coverage 2-2
coverage area 1-1, 2-9
CSMA/CA 5-3
CSMA/CD (Carrier Sense Multiple Access with Collision
Detection) 5-3
CTS (Clear to Send) 5-3
D
data encryption settings
128 bits WEP 3-4
152 bits WEP 3-4
64 bits WEP 3-4
AES 3-4
none 3-4
TKIP 3-4
TKIP + AES 3-4
data rates 802.11bgn 2-15
default access point name 2-6
default channel 2-15, 2-18
default gateway, configure 2-13
default IP address 2-4, 2-12
default password 2-4
default reset button 4-5
default SSID 2-10
default user name 2-4
default wireless access point name 2-10
DHCP
point-to-multi-point bridging 5-11
DHCP client
default setting 2-10
DHCP client, configure 2-12
DHCP client/server
support 1-2
DHCP server
on LAN 2-12
on LAN, assigns IP address 2-10
distributed coordinated function, support for 1-3
documentation 2-5
DTIM (Delivery Traffic Indication Message) interval 5-4
dual band concurrent, use 1-2
dynamic encryption key generation, support 1-2
dynamic IP address, configure 2-10
dynamic per frame rekeying 2-3
E
EDCA (Enhanced Distributed Channel Access) 5-5
Ethernet
RJ-45 port 1-8
ethernet cable, connect 2-10
External Registrar, WPS 3-5
F
factory default settings 4-3
reset button 1-8, 6-4
resetting 6-4
restore 4-4