User's Manual
Table Of Contents
- Wireless-N 300 Modem Router DGN2200 User Manual
- About This Manual
- Conventions, Formats, and Scope
- Revision History
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Configuring Your Wireless Network and Security Settings
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 USB Storage
- Chapter 6 Advanced Configuration
- Configuring WAN Settings
- Configuring Dynamic DNS
- Configuring LAN Settings
- Setting up Quality of Service (QoS)
- Advanced Wireless Settings
- Using Static Routes
- Configuring Universal Plug and Play
- Building Wireless Bridging and Repeating Networks
- Port Forwarding and Port Triggering
- Advanced USB Settings
- Traffic Meter
- Chapter 7 Troubleshooting
- Appendix A Wall Mounting and Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 300 Modem Router DGN2200 User Manual
6-20 Advanced Configuration
v1.0, November 2009
Here are some examples of wireless bridged configurations:
• Point-to-point bridge. The wireless-N modem router communicates with another bridge-
mode wireless station. See “Point-to-Point Bridge Configuration.”
• Multi-point bridge. The wireless-N modem router is the “master” for a group of bridge-mode
wireless stations. Then all traffic is sent to this master, rather than to other access points. See
“Multi-Point Bridge.”
• Repeater with wireless client association. Sends all traffic to the remote access point. See
“Repeater with Wireless Client Association.”
To view or change these configurations, select Advanced Wireless Settings from the main menu:
Note: The wireless bridging and repeating feature uses the default security profile to send
and receive traffic.
Figure 6-15