User's Manual

6-1
v1.0, November 2009
Chapter 6
Advanced Configuration
This chapter describes how to configure the advanced features of your wireless-N modem router.
For information about remote management, see “Configuring Remote Management” on
page 4-12. The following features are discussed in this chapter:
• “Configuring WAN Settings”
• “Configuring Dynamic DNS” on page 6-4
• “Configuring LAN Settings” on page 6-6
• “Setting up Quality of Service (QoS)” on page 6-9
• “Advanced Wireless Settings” on page 6-11
• “Using Static Routes” on page 6-15
• “Configuring Universal Plug and Play” on page 6-18”
• “Building Wireless Bridging and Repeating Networks” on page 6-19
• “Port Forwarding and Port Triggering” on page 6-25
• “Traffic Meter” on page 6-28
To use these features, log in to the wireless-N modem router at its default LAN address of
http://192.168.0.1 with its default user name of admin and default password of password, or
using whatever user name, password, and LAN address you have chosen for the wireless-N
modem router.
Configuring WAN Settings
To assign a computer or server to be a default DMZ server:
1. In the main menu, under Advanced, select WAN Setup to display the following screen.