User's Manual
Table Of Contents
- Wireless-N 300 Modem Router DGN2200 User Manual
- About This Manual
- Conventions, Formats, and Scope
- Revision History
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Configuring Your Wireless Network and Security Settings
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 USB Storage
- Chapter 6 Advanced Configuration
- Configuring WAN Settings
- Configuring Dynamic DNS
- Configuring LAN Settings
- Setting up Quality of Service (QoS)
- Advanced Wireless Settings
- Using Static Routes
- Configuring Universal Plug and Play
- Building Wireless Bridging and Repeating Networks
- Port Forwarding and Port Triggering
- Advanced USB Settings
- Traffic Meter
- Chapter 7 Troubleshooting
- Appendix A Wall Mounting and Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 300 Modem Router DGN2200 User Manual
5-12 USB Storage
v1.0, November 2009
• Network Neighborhood or My Network Place
Enabling File and Printer Sharing
Each computer’s network properties must be set to enable network communication with the USB
drive. File and Printer Sharing for Microsoft Networks must be enabled, as described below.
Configuring Windows 98SE and Windows ME
The easiest way to get to your network properties is to go to your desktop, right-click Network
Neighborhood and then click Properties. File and printer sharing for Microsoft Windows should be
listed. If not, click Add and follow the installation prompts.
Configuring Windows 2000 and Windows XP
Right-click on the network connection for your local area network. File and Printer Sharing for
Microsoft Windows should be listed. If not, click Install and follow the installation prompts.
Note: In Windows 2000 and Windows XP, File and Printer Sharing is enabled by default.
Note: Note: If you have any questions on File and Printer Sharing, please contact
Microsoft for assistance.