User's Manual
Table Of Contents
- Wireless-N 300 Modem Router DGN2200 User Manual
- About This Manual
- Conventions, Formats, and Scope
- Revision History
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Configuring Your Wireless Network and Security Settings
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 USB Storage
- Chapter 6 Advanced Configuration
- Configuring WAN Settings
- Configuring Dynamic DNS
- Configuring LAN Settings
- Setting up Quality of Service (QoS)
- Advanced Wireless Settings
- Using Static Routes
- Configuring Universal Plug and Play
- Building Wireless Bridging and Repeating Networks
- Port Forwarding and Port Triggering
- Advanced USB Settings
- Traffic Meter
- Chapter 7 Troubleshooting
- Appendix A Wall Mounting and Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 300 Modem Router DGN2200 User Manual
USB Storage 5-9
v1.0, November 2009
Creating a Network Folder
From the USB Storage (Advanced Settings) screen. Click the Create a Network Folder button to
open the Create a Network Folder screen:
You can use this screen to create a folder and to specify its Share Name, Read Access, and Write
Access from All-no password to admin. The password for admin is the same one that is used to
log in to the wireless-N modem router main menu. By default it is password.
Unmounting a USB Drive
To unmount a USB disk drive so that no users can access it, from the USB Settings screen, click
the Safely Remove USB button. This takes the drive offline.
Figure 5-6
Note: You must click Apply in order for your changes to take effect.
Warning: Unmount the USB drive first before physically unplugging it from the
wireless-N modem router. If the USB disk is removed or a cable is pulled
while data is being written to the disk, it could result in file or disk corruption.