User's Manual
Table Of Contents
- Wireless-N 300 Modem Router DGN2200 User Manual
- About This Manual
- Conventions, Formats, and Scope
- Revision History
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Configuring Your Wireless Network and Security Settings
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 USB Storage
- Chapter 6 Advanced Configuration
- Configuring WAN Settings
- Configuring Dynamic DNS
- Configuring LAN Settings
- Setting up Quality of Service (QoS)
- Advanced Wireless Settings
- Using Static Routes
- Configuring Universal Plug and Play
- Building Wireless Bridging and Repeating Networks
- Port Forwarding and Port Triggering
- Advanced USB Settings
- Traffic Meter
- Chapter 7 Troubleshooting
- Appendix A Wall Mounting and Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 300 Modem Router DGN2200 User Manual
USB Storage 5-1
v1.0, November 2009
Chapter 5
USB Storage
This chapter describes how to access and configure a USB storage drive attached to your wireless-
N modem router.
This chapter includes the following sections:
• “USB Drive Requirements” on page 5-2
• “File Sharing Scenarios” on page 5-2
• “USB Storage Basic Settings” on page 5-4
• “Configuring USB Storage Advanced Settings” on page 5-7
• “Unmounting a USB Drive” on page 5-9
• “Specifying Approved USB Devices” on page 5-10
• “Connecting to the USB Drive from a Remote Computer” on page 5-11
• “Connecting to the USB Drive with Microsoft Network Settings” on page 5-11
Figure 5-1
Note: The USB port on the wireless-N modem router can be used only to connect USB
storage devices like flash drives or hard drives. Do not connect computers, USB
modems, printers, CD drives, or DVD drives to the this USB port.