User's Manual

Wireless-N 300 Modem Router DGN2200 User Manual
2-15 Configuring Your Wireless Network and Security Settings
v1.0, November 2009
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the modem router.
To view a list of all devices connected to your modem router (including wireless- and Ethernet-
connected), see “Viewing Attached Devices” in Chapter 4.
Wireless Guest Networks
A wireless guest network allows you to provide guests access to your wireless network without
prior authorization of each individual guest. You can configure wireless guest networks and
specify the security options for each wireless guest network.
To configure a wireless guest network:
1. In the main menu, under Setup, select Wireless Guest Network to display the following screen:
2. Select the radio button for the network profile that you want to set up.
3. You can specify whether the SSID broadcast is enabled, and whether you want to allow the
guest to access your local network. You can also change the SSID.
• NETGEAR strongly recommends that you change the SSID to a different name. Note that
the SSID is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the Advanced WPS
Settings screen.
Figure 2-5