User's Manual

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
3-18 Management
v2.0, April 2013
1. Under the Configuration tab on the main menu, select Security, select Advanced from the
sidebar, and then select Rogue AP. The Rogue AP screen displays, as shown in Figure 3-8
below.
2. Check the Turn Rogue AP Detection On radio box to enable rogue AP detection and click
Apply.
If you enable Rogue AP Detection, the AP continuously scans the wireless network and
collects information about all APs heard on its channel.
3. You can Import AP List from a File. See “Importing Rogue AP List from a File” on page 3-18
for more information.
4. Under the Unknown AP List, click Refresh to discover the APs.
5. Click Move to add any AP to the Known AP List.
6. Click Delete to remove an AP from the Known AP List.
7. Click Apply to save your change.
Importing Rogue AP List from a File
To replace the existing AP list:
Figure 3-14 Enable Rogue AP detection