User's Manual
Table Of Contents
- ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNDAP350 Wireless Security Options
- Installing the WNDAP350 wirelss access point
- Logging In Using the Default IP Address
- Setting Basic IP Options
- Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 3 Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Configuration File Management
- Changing the Administrator Password
- Enabling the SysLog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing Rogue AP Statistics
- Packet Capture
- Chapter 4 Advanced Configuration
- Chapter 5 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WNDAP350 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Appendix C 2.0 Command Line Reference
- Index
ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
Basic Installation and Configuration 2-23
v2.0, April 2013
Program the wireless adapter of your PCs to have the same SSID that you configured in the
WNDAP350. Check that they have a wireless link and are able to obtain an IP address by
DHCP from the WNDAP350.
Once your PCs have basic wireless connectivity to the WNDAP350, you can configure the
advanced wireless security functions.
Understanding Security Profiles
Security Profiles let you configure unique security settings for each SSID. You can configure up to
eight unique 802.11b/bg/ng wireless security profiles or up to eight unique 802.11a/na wireless
security profiles on the WNDAP350 (see Figure 2-13).
Note: If you are configuring the WNDAP350 from a wireless computer and you
change the SSID, channel, or Security Profile settings, you will lose your
wireless connection when you click Apply. You must then change the wireless
settings of your computer to match the new settings.
Note: If you are using a RADIUS Server, configure the RADIUS settings first, as
described in the “Configuring WPA with RADIUS” on page 2-35.