User's Manual
Table Of Contents
- ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Basic Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNDAP350 Wireless Security Options
- Installing the WNDAP350 wirelss access point
- Logging In Using the Default IP Address
- Setting Basic IP Options
- Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- SSID and WEP/WPA Settings Setup Form
- Configuring the RADIUS Server Settings
- Setting up a Security Profile
- Configuring WEP
- Configuring WPA with RADIUS
- Configuring WPA2 with RADIUS
- Configuring WPA and WPA2 with RADIUS
- Configuring WPA-PSK
- Configuring WPA2-PSK
- Configuring WPA-PSK and WPA2-PSK
- Restricting Wireless Access by MAC Address
- Chapter 3 Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Configuration File Management
- Changing the Administrator Password
- Enabling the SysLog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing Rogue AP Statistics
- Packet Capture
- Chapter 4 Advanced Configuration
- Chapter 5 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN activity light does not light up.
- The LAN light is not lit.
- I cannot access the Internet or the LAN with a wireless capable computer.
- I cannot connect to the WNDAP350 to configure it.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Appendix C 2.0 Command Line Reference
- Index
ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
Index-7
v2.0, April 2013
Wireless Multimedia (WMM), support for 1-4
Wireless Multimedia Extension (WME) 4-8
wireless network name (SSID) 2-32
wireless point-to-multi-point bridge 4-10
wireless point-to-point bridge 4-10
wireless security options
restrict access based on MAC address. 2-3
turn off broadcast of wireless network name (SSID)
2-4
WEP, use 2-4
WPA or WPA-PSK, use 2-4
wireless settings 802.11a/na
broadcast wireless network name (SSID) 2-19
channel width 2-20
channel/frequency 2-19
guard interval 2-20
MCS index/data rate 2-19
output power 2-20
turn radio on 2-18
wireless mode 2-18
wireless network name (SSID) 2-18
wireless settings 802.11a/na, advanced
aggregation length 4-8
A-MPDU 4-8
beacon interval 4-7
DTIM interval 4-8
fragmentation length 4-7
RIFS transmission 4-8
RTS threshold 4-7
wireless settings 802.11b/bg/ng, advanced
aggregation length 4-6
A-MPDU 4-6
antenna 4-6
beacon interval 4-5
DTIM interval 4-6
fragmentation length 4-5
preamble type 4-6
RIFS transmission 4-6
RTS threshold 4-5
wireless settings 802.11bgn
broadcast wireless network name (SSID) 2-16
channel width 2-17
channel/frequency 2-16
guard interval 2-17
MCS index/data rate 2-17
output power 2-17
turn radio on 2-16
wireless mode 2-15
wireless network name (SSID) 2-16
wireless settings, basic 2-10
wireless sniffer 2-4, 2-19
WP
A and WPA2 with RADIUS
restiction with WPA and WPA2 2-38
WPA and WPA2 with RADIUS, configure 2-39
data encryption 2-39
network authentication type 2-39
wireless client security separation 2-39
WPA preshared key passphrase, use with WPA-PSK 2-
27
WPA with RADIUS, configure 2-35
data encription default 2-36
network authentication type 2-36
wireless client security separation 2-36
WPA with RADIUS, restrictions 2-35
WPA/WPA2
use restrictions 2-25
WPA/WPA2, support for 1-2
WPA2 with RADIUS, configure 2-37
data encryption default 2-38
network authentication type 2-38
wireless client security separation 2-38
WPA2-PSK, configure
data encryption 2-42
network authentication type 2-42
preshared key passphrase 2-42
restrictions using WPA2 2-41
wireless client security separation 2-42
WPA-PSK and WPA2-PSK preshared key authentication,
support 1-2
WPA-PSK and WPA2-PSK, configure
data encryption 2-43
network authentication setting 2-43
restrictions using WPA/WPA2 2-42
wireless client security separation 2-43
WPA passphrase (network key) 2-43
WPA-PSK, configure
data encryption 2-41
network authentication type 2-41
preshared key passphrase 2-41










