User Manual
Table Of Contents
- RangeMax Wireless-N Gigabit Router DSL Modem Setup Manual
- Contents
- Getting to Know Your Wireless Router
- Installing Your Router Using the Smart Wizard
- Installing Your Router Manually (Advanced, Mac, and Linux Users)
- Configuring Your Wireless Network
- Troubleshooting
- Technical Specifications
- Related Documents
- Registration and Certifications
Troubleshooting 37
Using the Wireless On/Off and WPS Buttons to Reset the Router
To restore the factory default configuration settings without knowing the administration password
or IP address, you must press the Wireless On/Off button and the WPS Dome on top of the router
simultaneously.
1. Press and hold the Wireless On/Off and WPS buttons until the Power LED blinks red (about
6 seconds).
2. Release the Wireless On/Off and WPS buttons and wait for the router to reboot.The Power
LED will blink red three times and then will turn green when the default configuration settings
have been restored.