User Manual
Table Of Contents
- NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
1-9
v1.0, December 2008
2. Press the WPS button on your wireless USB adapter, or press the soft WPS button on the
Smart Wizard screen.
WPS activity LEDs will blink on both the router and the wireless USB adapter. A progress bar
on the adapter WPS screen indicates progress.
3. After the router has transmitted its wireless settings, a screen displays showing your settings.
Review your settings and then click Finish to connect to your network. A profile of your
wireless settings will be saved with the same profile name as your network (SSID) name.
Figure 1-8
Figure 1-9
Press to connect to a
WPS-enabled network