User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
1-8
v1.0, December 2008
2. Click Next to proceed. The next screen that displays depends on whether there is a wireless
router or access point at your location that supports Wi-Fi Protected Setup (WPS).
Connecting to a WPS-Enabled Network
WPS allows you to automatically connect to a WPS-enabled network without having to enter a
password.
To connect to a WPS-enabled network:
1. Enable WPS on your router. Go to your router or access point and either press the WPS button
on the device or open the router utility and follow the instructions for adding a WPS client.
You have about 2 minutes to initiate the connection on the wireless USB adapter.
Figure 1-7