User Manual
Table Of Contents
- Contents
- Getting to Know Your Wireless Router
- Installing Your Router Using the Smart Wizard
- Manually Installing Your Router
- Configuring Your Wireless Network
- Troubleshooting
- Technical Specifications
- Related Documents
- Registration and Certifications
2 Getting to Know Your Wireless Router
To prepare your router for installation:
1.
Set up your wireless-N router by placing your router firmly on the stand (supplied with your
router) as shown in Figure 1. Make sure that the NETGEAR logo is at the bottom.
2. Place your router in a suitable area for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
Figure 1
To ensure proper heat dissipation and for router stability, it is important that you
connect the stand and place your router in an upright position.
NETGEAR logo