User Manual
Table Of Contents
- NETGEAR WNAP210 ProSafe Wireless-N Access Point Reference Manual
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Using the Reset Button to Restore Factory Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
ProSafe Wireless-N Access Point WNAP210 Reference Manual
4-10 Management
v1.0, February 2009
Configure the RADIUS Server Settings menu with the parameters described in Table 4-1:
Table 4-1. RADIUS Server Settings Fields
Field Description
Primary and Secondary
Authentication Servers
The Authentication RADIUS Server provides authentication and access control.
The primary server is mandatory. A secondary server, which will be used if the
primary server fails, is optional.
IP Address The IP address of the authentication server. If no server is present, enter
0.0.0.0.
Port Number The port number used for communication to the authentication server. The
default port number for an authentication server is 1812.
Shared Secret The shared secret to establish a client connection to the Radius server, as
entered on the server itself.
Re-authentication Time The time interval in seconds after which the supplicant will be authenticated
again with the RADIUS Server.
The default interval is 3600 seconds.
Update Global Key Enable this option to have the Global Key changed according to the time
interval specified. If enabled, enter the desired time interval.
The default is enable, and the default interval is 3600 Seconds
Update if any station
disas
sociates
Enable this option to refresh the Global Key whenever any station disassociates
with the wireless access point. The default is disable.
Primary and Secondary
Accounting Servers
The Accounting RADIUS Server provides accounting services. The same
RADIUS server may be used for both authentication and accounting, but the
port numbers for authentication and accounting must be different. The
accounting servers are optional.
IP Address The IP address of the accounting server. If no server is present, enter 0.0.0.0.
Port Number The port number used for communication to the accounting server. The default
port number for an accounting server is 1813.
Shared Secret The shared secret to establish a client connection to the RADIUS server, as
entered on the server itself.
To configure the RADIUS Server Settings:
1. Select Radiu
s Server Settings under the Security menu on the left navigation pane of the
user interface. The Radius Server Settings screen will display.