User Manual

Figure 4-4
ProSafe Wireless-N Access Point WNAP210 Reference Manual
4-4 Management
v1.0, February 2009
2. Select the task you want to perform:
• To create a backup file of the current settings, click Backup un
der the Save a Copy of
Current Settings heading.
– If you don’t have your browser set up to save downloa
ded files automatically, locate
where you want to save the file, rename it if you like, and click Backup.
– If you have your browser set up to save downloaded files automatically
, the file will
be automatically saved to the download location
• To restore settings from a backup file:
– Click Br
owse under the Restore Saved Settings from a File heading. Locate and
select the previously saved backup file (by default, netgear.cfg).
– Click Retr
ieve. A window will appear with the message that the wireless access point
has been successfully restored to its previous settings. The wireless access point will
restart. This will take about one minute.
Warning: Do not try to go online, turn off the Access Point, shut down the
computer or do anything else to the Access Point until it finishes
restarting. When the Test light turns off, wait a few more seconds
before doing anything with the Access Point.
– Close the message window.
• To erase the current settings and reset the wireless
access point to the original factory
default settings:
– Click R
estore. The default factory settings will be restored.